多材料多噴頭3D打印機Hyrel再推新產品HYREL System 30

多材料多噴頭桌面3D打印機開發商Hyrel 3D公司新近推出了新款3D打印機：HYREL System 30。
System 30采用全金屬設計，全封閉式打印倉，和獨立的封閉式線材倉，隔離了在打印過程中可能帶來的環境污染，提高了機器的安全性能。機器下方配備有緊急停止（EMO）按鈕和發光控制屏；線材倉前方有回轉式LCD觸摸屏和內置PC；打印倉內配備有樹狀工具支架，可裝載8個打印噴頭，是目前所有桌面3D打印機中可裝載打印噴頭最多的一款打印機，而且打印噴頭還可以根據用戶的需求任意替換，甚至還能夠兼容體積更大的擠出器。

而在耗材方面，Hyrel的多材料打印依然奪人耳目：粘土、橡皮泥、sugru、硅膠RTV，陶瓷，ABS，PLA，尼龍等等均在其可打印范圍。

機器規格：

整機體積：87×42×79厘米
構建體積：225×200×200毫米
最高分辨率：20微米
整機重量：23公斤
價格：4000~7000美元

Build Volume, Posi onal Accuracy & Posi onal
Axis Travel Pos. Accuracy Pos. Resolu on
X Axis 225+ mm +/- 50 microns 5 microns
Y Axis 200+ mm +/- 50 microns 5 microns
Z Axis 200 mm +/- 20 microns < 1 micron
Chassis & Enclosure:
Powder-coated Steel & Anodized Aluminum
Acrylic Windows
Mo on Control:
Precision Ball Screw in Z-axis
IKO Linear Bearing System in X, Y, and Z Axes, rated to
20,000km before first manufacturer suggested lubrica on
Posi onal Resolu on
Electronics:
State of the art, 150+ MHz 32-bit ARM processor
Modular, micro-stepping motor-drivers
Integrated, Dual CAN-bus architecture
“Smooth Move” mo on control technology firmware
Integrated Web-Cam for build-area monitoring


Out-of-the-box, doors open & LCD fully extended
Weight: 50 lbs / 23 kgs
Length: 50 in / 127 cm
Width: 38 in / 97 cm
Height: 31 in / 79 cm
Out-of-the-box, doors closed & LCD fully retracted
Weight: 50 lbs / 23 kgs
Length: 34 in / 87 cm
Width: 16.25 in / 42 cm
Height: 31 in / 79 cm
ITX Power Supply Specs:
Power: 650 W
Voltage: 115 / 230 V
Current: 16 / 8 A
Frequency: 60 / 50 Hz
Physical On/Off Switch: Yes
IEC-60320 C14 connector
IEC-60320 C13-to-NEMA 15 Power Cable
US Standard—must supply your own if Interna onal